Seamless Cold Drawn Titanium Alloy Tube Titanium Gr . 2 Pipe OD 60.3 mm

Seamless Cold Drawn Titanium Alloy Pipe Titanium Gr . 2 Pipe OD 60.3 mm

Of the four commercially pure (C.P.) titanium grades, Grade 2 is typically used in applications that require superior corrosion resistance in various aggressive media. Corrosion resistance is similar between these four C.P. grades but mechanical properties vary along with varying oxygen and iron contents. Typical applications for the “C.P.” grades include chemical process, petroleum refining, biomedical as well as heat exchangers in an array of different applications. Continuous service temperatures can reach up to 800°F with occasional, intermittent service at 1000°F.

Product Standard: ASTM B338 ASME SB338

Grades: Grade 2.

Characteristics:

1.Ti Grade 2 has moderate strength with excellent cold formability, weldability.

2.Resistance to Corrosion

Titanium’s C.P. grades corrosion resistance comes from a strongly adherent, stable, protective oxide film, which forms in the presence of oxygen. This film makes the commercially pure titanium grades resistant to most oxidizing, neutral and inhibited reducing as well as mildly reducing environments. Strong reducing media may cause heavy corrosion.

Application:

Petrochemical

Aerospace

Medical equipment

Oil and gas

Seawater equipment

Chemical composition & Mechanical properties:

Mark: As required.

Inspection and Test: chemical composition test, mechanical properties test(tensile, yield, elongation), process properties test(flatting, flaring, bending, hardness, impact, etc.), appearance and size test, non-destructive inspection test, hydrostastic test.

Packing: Exporting package/wooden box /as requirement.

titanium welded tubes

small diameter titanium tubing

Seamless Cold Drawn Titanium Alloy Tube Titanium Gr . 2 Pipe OD 60.3 mm Images