Multiple Sizes Plastic Tower Packing Large Void Space For Petroleum And Chemical

Plastic Tower Packing Used In Petroleum And Chemical , Plastic Saddle Rings

Plastic intalox saddle is made from heat resistant and chemical corrosion resistant plastics, including PP, PVC, CPVC and PVDF. It has features such as large void space , low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity , high mass transfer efficiency and so on, and the application temperature in media ranges from 60 to 280℃ . For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc.

Plastic intalox saddle is a combination of the ring and the saddle, which benefits the advantages of the two. This structure helps liquid distribution and enlarges the quantities of gas holes. The Intalox Saddle has less resistance , bigger flux and higher efficiency than the Pall Ring. It is one of the most widely used packing with good hardness. It has low pressure, big flux and high efficiency of mass transfer, and it is easy to manipulat.

Performance:

Good Capacity and Low Pressure Drop

Higher capacity and lower pressure drop than ceramic saddles.

Multiple sizes provide ability to optimize capacity and efficiency based on application requirements.

Higher Liquid Hold-up and Residence Time

Relatively high liquid hold-up allows good absorption efficiency with slow chemical reaction.

Versatile Standard Packing

Lower sensitivity to liquid and vapor distribution quality allows use with conventional liquid distributors.

Specification of Plastic Saddle Ring:

Applications: Used in petroleum and chemical , alkali chloride, gas and environmental protection industries with max temperature of 280℃.

plastic tower packing

tellerette random packing

Multiple Sizes Plastic Tower Packing Large Void Space For Petroleum And Chemical Images