Large Active Surface Area Plastic Tri Pack Media For Biological Filtration
Plastic Tri-Packs is a hollow spherical shaped packing made of injection moulded plastic in four sizes: 1”, 1 1/4”, 2”and 3 1/2”diameter.
Its symmetrical geometry made from a unique network of ribs, struts and drip rods yields unprecedented performance. It has high void space, greater than packings of comparable size, and achieves superior pressure drop values, up to 90% reduction, as compared to other products. The packing has a high ACTIVE surface area, exposing all of its surface area to be fully wetted during column operation. The performance capabilities of plastic Tri-Packs have resulted in significant savings in hundreds of packed column operations.
Materials: Polypropylene(PP), Reinforced Polypropylene(RPP), Polyethylene (PE), Polyvinylchloride (PVC), Corzan (CPVC), Kynar (PVDF)Reinforced Nylon 6, Reinforced Nylon 66, …
| Properties of Tri-Packs Tower Packing |
| Size (inches) | 1" | 1-1/4" | 2" | 3-1/2" |
| Geometric Surface Area (ft2 ft3) | 85 | 70 | 48 | 38 |
| Packing Factor I/ft | 28 | 25 | 16 | 12 |
| Void Space % | 90 | 92 | 93 | 95 |
| Weight (lb/ft3) | 6.2 | 5.6 | 4.2 | 3.3 |
Mass Transfer Data of Tri-Packs:
| Absorption System | G
(lb./hr. ft2) | L
(lb./hr. ft2) | Temp
(F°) | HTU (inches)
2" & 3-1/2" | HTU (inches)
1" |
| HCl-H2O | 1792 | 2048 | 77 | 10.6 | 7.0 |
| HCl-NaOH | 1567 | 2048 | 68 | 8.8 | 6.1 |
| Cl2-NaOH | 1229 | 2202 | 122 | 14.5 | 9.9 |
| NH3-N2SO4 | 492 | 1024 | 68 | 6.0 | 4.1 |
| NH3-H2O | 512 | 1024 | 68 | 8.4 | 5.6 |
| NH3-H2O | 512 | 4096 | 68 | 5.4 | 3.6 |
| SO2-NaOH | 1946 | 4096 | 140 | 12.0 | 8.1 |
| HF-H2O | 1844 | 3072 | 77 | 6.9 | 4.6 |
| CH2COCH3-H2O | 1700 | 860 | 68 | 15.2 | 10.2 |
| H2S-NaOH | 1229 | 1331 | 68 | 19.4 | 13.0 |
| VOC Stripping | G
(lb./hr. ft2) | L
(lb./hr. ft2) | Temp
(F°) | HTU (inches)
2" & 3-1/2" | HTU (inches)
1" |
| TCE(ppm)-H2O | 479 | 12264 | 77 | 26.9 | 21.5 |
| TCE(ppm/ppb)-H2O | 690 | 12494 | 60 | 37.6 | 30.1 |
| BTX(ppb)-H2O | 722 | 4998 | 70 | 39.2 | 31.4 |
Benefits: Highest mass and/or heat transfer rate;Extremely low pressure drop;Resists plugging, nesting and wall channelling;Highest flooding point and lowest wetting point;Even gas and liquid distribution;No interlocking or meshing;No interlocking or meshing;Used as a mist eliminator.
Application: Widely used in petroleum and chemical industries, alkali chloride industries, gas industries and environmental protection industries with max. Temperature of 150 degree centigrade.
Product Tags:
|
|
Large Active Surface Tri Pak Packing , Plastic Jaeger Tri Packs For Biological Filtration Images
|
